Top driveway sealers online shopping in the UK? Blooming/Whitening of Sealer Coat/Film–This is a much wider problem and it can occur on all the substrates – Imprinted/Pressed Concrete, Natural Stone. Indian Stone, Block Paving, Man-Made paving, Slate and Granite, Brick and Stone. This can happen on the first sealer coat/film that is applied or at any time when any of these substrates are resealed. We go back to the rules of how and when these products need to be applied. The solvent content of these products which gives it its longevity has an instant reaction to moisture /water before the curing period of 10 – 14 hours. This means that during that period if it rains or the temperature drops moisture can settle on the sealer coat/film and give it a ghosting effect or whitening effect, sometimes on darker substrates you may not see it as a ghosting effect but as a colour diminishes for example Black coloured products can look grey. With our Bloom Remover we will explain how easy it is to get rid of the problem. See additional info at https://www.swiss-seal.co.uk/cleaners/.
Treating weeds in artificial/fake grass – Autumn can bring on the issues of weeds, moss, and algae to the artificial/fake or fake grass. To remove these issues, you would do the following. Power wash the artificial/fake/fake grass. This will remove all but very stubborn stains, use our SWISS-SEAL ARTIFICIAL GRASS CLEANER to treat the grassed area, the solution is environmentally friendly and works extremely well at treating all these issues. When this is done remove any excess with a soft broom, then rinse with the power wash, and if necessary, when dry replace any lost sand.
These 5 litres of Shift-It Patio and Driveway Cleaner concentrate will treat approximately 125 square metres. Always test a small area before use to ensure compatibility and that the finish is acceptable. The surface should be clean. Remove loose dirt, moss, and other debris from the surface to be treated. Do not use in wet weather or when rain is imminent. Apply Shift-It Patio and Driveway Cleaner to a damp (not wet) surface with a soft brush or medium pile roller. Clean brushes, rollers immediately after use with soapy water. Leave for 24 hours before lightly pressure washing the area with cold clean water.
Our Imprinted Concrete Chemicals include Colour Hardeners (20 different colours), Release Agents (liquid or dry powder), Sealers (gloss or satin), Imprinting mats over 50 designs manufactured in cobble, ashlar, stone, slate & wood patterns. We manufacture all our own Colour Hardeners, Release Agents, Sealers, Imprinting Mats, Overlay Screed, Acid Stains and printable renders, at our facilities here in Preston & Garstang, Lancashire.
We are a UK based manufacturers of cleaning agents, moss and mould removers and sealers for block paving, Indian stone, natural stone, tarmac, concrete paving and imprinted concrete. Swiss-Seal now sell a range of water based eco-friendly acrylic, polyurethane and fluoro-polymer based products to compliment our current extensive range of solvent based sealers. See even more info on driveway cleaning chemicals.